Rubber products
| |
|
|
|
|
|
|
Volume
resistivity (x cm ) |
Flame-resistant
(2) |
Note |
|
| N°11EP |
Self-binding
electric tape |
R |
0,5
; 0,8 |
40 |
980 |
45 |
N/A |
N |
Excellent
resistance to atmospheric agents and to the crown effect |
For end-insulation of electric cables |
| N°15 |
Self-binding
electric tape without liner |
R |
0,5
; 0,75 |
32 |
550 |
44 |
N/A |
N |
Very
short application time due to the lack of liner |
For end joints, jointing and protection from corrosion of cables. |
| 57GO/c |
Sealing
tape |
R |
2,4 |
3KG/25
mm |
600 |
33 |
N/A |
N |
Perfect
water seal also with uneven shapes. |
A perfect protection layer, resistant to the corrosion, for highly uneven surfaces. |
| N°66 |
Silicone
gum tapeself-binding |
R |
0,31 |
21,16N/cm |
594 |
13,2Kv |
N/A |
N |
Excellent
resistance to atmospheric agents and to the heat |
Protect the insulation of joints between electric cables. |
| N°68 |
Silicone
gum tape self-binding |
R |
0,3 |
78N/cm |
26 |
17Kv |
N/A |
N |
Nitto
n. 68 is ideal in mild and cold climates |
Resistant to corrosion, heat-resistant with geotechnical energy and steam. |
| 12FB
A |
Surfacing
tape self-amalgamating |
R |
1 |
N/A |
>3000 |
17 |
N/A |
N |
Soft
bonding plaster with reliable sealing performances and anti-corrosion
coating. Minimum overlapping is required. |
To be applied and wound around cable joints. |
| 12FB
B |
Surfacing
tape self-amalgamating |
R |
2,3 |
N/A |
>3000 |
17 |
N/A |
N |
Soft
bonding plaster with reliable sealing performances and anti-corrosion
coating. Minimum overlapping is required. |
To be applied and wound around joints and cables. |
| 12FB
C |
Surfacing
tape self-amalgamating |
R |
3 |
N/A |
>3000 |
17 |
N/A |
N |
Soft
bonding plaster with reliable sealing performances and anti-corrosion
coating. Minimum overlapping is required. |
To be applied and wound around joints and cables. |
| N°16S |
Self-bnding
semiconductive butiyl gum |
R |
0,7 |
30 |
340 |
N/A |
5,71
x 10 alla terza |
N |
Excellent
resistance to cracking |
To lower electric fields in the joints between cables. To check the stress from outer conductivity (direct connection to thermal joint) |
| N°1600 |
Stress-control
self-binding tape |
R |
0,5 |
86 |
260 |
N/A |
6
x 10 alla undicesima |
N |
Compatible
with cables equipped with polymeric insulation |
To lower electric fields in the joints between cables. |
| CP
Tape SC |
Stress-control
self-binding tape |
R |
0,7 |
86 |
Molto
alto |
N/A |
6
x 10 alla undicesima |
N |
Rubber-cement
type |
To lower electric stress with high dielectric constants. |