|
|
| |
|
|
| |
|
|
| |
Operative and Administrative Office
Via L. Biagi, 65 D/22
20099 Sesto S. Giovanni
MILANO
Tel. ++39 2 2481116 r.a.
Telefax ++39 2 26225377
Operative unit of Italy center
Via Porta Castagnara, 3
01038 Soriano Nel Cimino
VITERBO
Tel. ++39 0761 745043 |
| |
|
| |
|
| |
|
|
|
 |
|
Water dispersion adhesives offer perfect
gluing solutions for light materials, foams, upholstery
and rockwool, in the respect of the environment,
as they are solvent-free. They are an economic and
advantageous solution in conformity with the regulations
in force as regards environmental protection and
are fireproof when in a liquid state. A wide range
of products enable to choose in the best way as
regards quickness and gluing level; In addition,
they are the ideal for low superficial energy materials
and provide excellent hotgluing resistance. |
Scotch-WeldTM
40/9313
(ex Fastbond) |
Base |
Viscosity
m Pas |
Dry
Product % |
Open-assembly
time |
Hiding
power
m2/lt |
Heat
resistance |
Water dispersion adhesive
with high viscous contact resistant to the light,
UV, washing and ageing. High flexibility.
|
Polychloro-
prene |
8.000
ca |
49
ca |
Up
to 240' |
10-16
ca |
-40/+95°C |
Recommended
for:
fabric (also finishing), paperboard, papers, wood,
plastic laminates, foams, primerized metals. |
| |
Scotch-WeldTM
49
(ex Fastbond) |
Acrylic |
450-650 |
53-57
ca |
24
hours |
20.2 |
-40/+160°C |
| Water
dispersion adhesive with high content of solids
and short setting time. |
Recommended
for:
assembling light materials like glass wool, felt,
reclaimed wool, paper exc, with metals and other
surfaces. |
| |
Scotch-WeldTM
100
(ex Fastbond ) |
Polychloro-
prene |
15-40 |
47
ca |
15
sec.
20 min. |
24
(20g/m2 dry) |
+110/+160°C |
| Single-component
water dispersion adhesive with fast adhesive capacity.
Polychloroprene-based. |
Recommended
for:
gluing of many porous materials, like foamy polyurethane,
foamy latex, synthetic fibres, wood, plywood and
many other plastics and metal materials. |
| |
Scotch-WeldTM 2000
(ex Fastbond) |
Polychloro-
prene |
-
|
50
ca |
Up
to 120' |
10-16
ca |
-30/+100°C |
| Bicomponent
water dispersion adhesive, immediate gluing. |
Recommended
for:
gluing foams, fabrics, wood, protected metals, rockwool.
|
| |
4235
- Scotch-WeldTM
(ex Scotch-GripTM) |
Acrylic |
4.000
ca |
55
ca |
Up
to 30 gg |
8-15
ca |
-30/+60°C |
| Water
dispersion, pressure-sensitive adhesive with a good
level of initial repositionability. It can be used
for packaging, labelling, insulation, exc. |
Recommended
for:
gluing of materials as glass, papers, cardboard,
primerized metal, polystyrene, crystal, PVC, ABS,
Plexiglas, rubbers, exc. |
| |
5034
- Scotch-WeldTM
(ex Scotch-GripTM) |
Polychloro-
prene |
400
ca |
50
ca |
Up
to 120 min |
10-16
ca |
-30/+105°C |
| Water dispersion contact adhesive with high-level initial gluing and good penetration into porous materials. |
Recommended
for:
gluing of foams, plastic laminates, wood, fabrics
and primerized metals . |
| |
7434
- Scotch-WeldTM
(ex Scotch-GripTM) |
Acrylic |
4.000 |
52
ca\ |
Up
to 3 days to contact |
8-15
ca |
-30/+70°C |
| Water
dispersion, pressure-sensitive or contact adhesive.
Rapidly achieves high-level gluing. |
Recommended
for:
polyethylene, polypropylene, EPDM, PVC, glass wool,
felt, cardboard, cork, sponges and rubbers. |
| |
9309
- Scotch-WeldTM
(ex Scotch-GripTM) |
Acrylic |
5.000 |
50
ca |
Up
to 3 days |
12 |
-40/+90°C |
| Water
dispersion acrylic, pressure-sensitive adhesive
with medium initial tack. It can be applied with
a brush, by a spatula or by a spray system. |
Recommended
for:
polyethylene and polypropylene. |
| |
|
| |
|
|
